Middle Finger Ghosts Uv Dtf Wrap

Double-Sided UV DTF Cup Wraps & Decals

Our double-sided UV DTF wraps and decals are designed to deliver vibrant, professional-quality results with no special equipment required. Each design is printed using UV DTF technology, creating crisp detail, bold color, and a smooth finish that applies cleanly to a wide variety of hard surfaces.

Unlike standard UV DTF transfers, these designs are printed on both sides of the transfer, allowing the artwork to be visible from both the outside and inside of clear cups and other transparent surfaces.

Sizing

Our cup wraps are designed primarily for 16oz glass can tumblers. Wraps may require light trimming depending on the exact size and brand of your cup.

Decals are ready to apply as-is.

Recommended Surfaces

UV DTF transfers adhere best to smooth, clean, non-porous surfaces such as:

• Glass
• Acrylic
• Stainless steel
• Plastic
• Coated metals

Easy Application

Double-sided UV DTF wraps apply just like standard UV DTF transfers. The design is already printed on both sides of the transfer—there is no second layer or additional application required.

1. Make sure the surface is completely clean, dry, and free of oils.
2. Peel the backing from the transfer.
3. Carefully position the design on your item.
4. Press and burnish firmly across the entire design.
5. Slowly remove the carrier film.

UV DTF transfers create a strong, permanent bond, so carefully position your design before pressing it onto the surface. Once applied, it cannot be repositioned.

Care Instructions

• Hand wash only
• Do not soak
• Do not scrub the design
• Not dishwasher safe
• Not microwave safe
• Avoid extreme heat

Please Note

UV DTF transfers are intended for permanent application. Colors may vary slightly depending on your screen or monitor.

This listing is for the UV DTF wrap or decal only. Cups, tumblers, and accessories shown in photos are not included.